Versions Compared

Old Version 15

changes.mady.by.user Dann

Saved on

compared with

New Version Current

changes.mady.by.user Dann

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Epson 4880 (2008 model)

Purpose/Overview
Specifically for the 4880 in the IdeaLab Weitz 027: How to make high quality photographic prints (up to 17"x22") using the "Premier Premium Photo, Micropore Luster 10.4 Mil" paper. Or for using Epson Premium Lustre paper, found in the IdeaLab.  For details about the settings that Premier recommend, see the Epson Ultrachrome section of the following webpage: http://www.premierart.info/pp_driver_settings.php

TUTORIAL:

I.  THE PRINTER:

1. Put Place a stack of Epson Premium Pro Luster Paper into the paper tray, face down (usually the shiny side down).

Note:  the printer works optimally if you have a stack in the tray even if you only plan to make a couple of prints. The paper that you will use for CAMS classes and      most PEPS printing is the "Premier Premium Photo, Micropore Luster 10.4 MiL" Matte and Glossy paper is also available.  For detailed pictorial instructions about how to load paper SEE page pp153-158 in the Epson 4880 Manual.

II.  PREPARING YOUR PHOTOSHOP FILES

  1.  Adjust your images in photoshop to your taste. 
    Note:  Epson printers, print out DARKER than the image appears on-screen so you may want to over compensate a little to make up for this in the levels settings.
  2. Once you've prepared your file, you need to "Convert to Profile" by choosing Edit > Convert to Profile in Photoshop.
  3. Select the "Destination Space" P4880 PLPP260" (which stands for Premium Luster Photography Paper, 260 pertains to Epson's grading settings).  
    1. Engine:  Adobe (ACE)
    2. Intent:  Colorimetric
    3. SELECT: Use Black Point Compensation
    4.  SELECT:  Use Dither
      See screenshot below for a visual
      Below is a screenshot of the Convert to Profile window and with the desired settings.

 

Note
  1. The wise photographer saves paper, ink, and money by printing test strips with different levels applied and ideally a color Profile Proof.
  2. 1.  If you would like a detailed list of what these ICC color profile codes translate to, you can download this spreadsheet "key" and assorted PDFs which explain the ideal settings for each.


IV.  PRINTING:

A.  PHOTOSHOP PRINT SETTINGS

  1.  File > Print opens the Photoshop Print Dialog BoxSettings window. There are several settings to be aware of in this boxwindow.
  2. Printer: make sure that the Epson Stylus Pro 4880 is selected.
  3. Copies: 1 (even if you're printing multiple, print one at a time)
  4. Layout: be sure that your paper selection matches your photoshop image layout.
  5. Color Management: the "Document Profile" should read Pro488- PLPP260 because you defined that Profile in previous steps.
    1. Color Handling: "Photoshop Manages Color"
    2. Printer profile: Reselect the printer profile again from this list, e.g: Pro4880 PLPP260  NOTE:  WHEN YOU MAKE THIS SELECTION, a dialog box will pop up, with dire warnings, prompting you to "GET IT" or "CANCEL."  Just press "CANCEL."  This is a bug in CS 6, and we can just ignore this warning.
    3. Normal Printing: Leave this selected.  Do not choose hard printing.
    4. Rendering Intent: Perceptual–as it appears most "natural" for photography printing
    5. SELECT: Black Point Compensation
    When


Below is a screenshot of the Photoshop Print Settings window with the desired settings.

Image Added

6.  Leave the Photoshop Print Settings window open.  Now that you have verified that the

...

Photoshop Print Settings, above, are correct,

...

you need to adjust the Printer Settings.

 B.  PRINTER SETTINGS

  1. Click PRINT SETTINGS at the top right of the Photoshop Print Settings window, next to Copies.  

...

Image Removed

...

  1.  This opens a new, Printer Settings window.
  2. The only settings you need to work with are: Layout, Color Matching and Printer Settings.

...

  1.  
    1. Layout refers primarily to your paper size.  Select the paper size you have loaded in the printer.  See the screenshot below for suggested settings.
      *Standard PEPS paper sizes follow:
      1. 8.5" x 11" (US Letter)
      2. 13" x 19"  (Super A / B  13 x 19 in)
      3. 17" x 22"  (US C)
      4. Roll (17" x the length you determine)

Image Added
3. Switch from Layout to Color Matching. 

    a.  Under Color Matching, select "ColorSync," which allows the printer to interact with the ICC profile defined in Photoshop.  

     *Note:  these options may be grayed out with ColorSync pre-selected.  This is a result of the settings you have already chosen.  If not, select ColorSync.

7. The

3. Switch from Layout to Color Matching. 

4.  Switch from Color Matching to Printer Settings, the most important controls are the options for Printer Settings. In  

     *Note:  In general you will only ever have to work with the Basic settings, however if you plan to use the Advanced B+W mode you may need to look at the advanced settings to make                      

                 make the appropriate color temperature tweaks. Important Settings:
Page Setup: you defined these settings in the Layout window, but you do need to let the printer know whether you are using a paper roll or the Paper Tray.
Media Type: it

      a.  Page Setup: select Paper Tray (Sheet) or Manual Feed (Roll)  
      b.  Media Type: We recommend using the Premium Luster Photo Paper 260 that CAMS encourages, but glossy (Premium Glossy Photo Paper 250) and matte (Ultra Premium Presentation

                                 Matte) are also available.  The settings for Premium Luster Photo Paper (PLPP260) are shown in the screenshot below.

           *Note:  It is really important to pick the correct paper type other the printer may not print at all (or the results will be erratic). The settings shown below are correct for the "Premier Premium Photo, Micropore Luster 10.4 MiL" used in CAMS. If  If you are unsure of the correct settings, check the manufacturers                        

                       manufacturers website or the ICC spreadsheet which is linked to in this tutorial.
Print           

       c.  Print Mode: select "AccuPhoto HD, but since Photoshop " – the selection to use if Photoshop is managing colors, this isn't changeable.
Color Mode: No need to worry about this field since Photoshop        d.  Color Mode:  select "Off."  You want Photoshop managing the colors, not the Epson printer, is managing the colors.
Output        e.  Output Resolution: select "SuperPhoto 2880dpi this " as it is specified by the manufacturers for the "Micropore Luster" paper                                                                                            

       f.  select only "High Speed."



8. When you are finished click 5. Click "Save" to store all of your settings. You will be sent back to the dialog shown in step 4, click print  The Printer Settings window should now close, and you should now be back at the Photoshop Print Settings.

C.  PRINT

        1.  Click Print and you should have a beautiful print in a few minutes. Remember  Remember to allow luster a bit of time to dry, we have art handling gloves in the IdeaLab if you need to borrow some.

...

.  Touch only the outside edges of the paper.  Carefully place in the drying rack for about an hour.  (Still avoid touching the face of the paper when it's dry.)

D.  Other Resources

  •  Please make a printing consultation appointment by sending an e-mail to: idealab@carleton.edu