Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Overview

External Relations has a conference room on 3rd floor in 200 Division Street, commonly referred to as the 'Large Conference Room,' room number 304.

...

  1. Turn on the Sharp TV using the Sharp Aquos remote. The "Power" button on the remote is in the upper left corner.
  2. Using the Sharp Aquos remote, press the "Input" button, about midway down, to the right of the channel up/down button. Select "Mac Mini" from the TV input source list using the up and down arrows.

 

 Logging into the Mac mini Computer

Please note: Anyone with a Carleton Network ID and password will be able to log into this computer, and this is the recommended way to use this computer. Applications such as Network Drive mapping, OnBase, PGCalc, etc, require a unique username and password that is most ideally the person logged into the computer.

...

  1.  Press Ctrl + Alt + Delete
  2. Enter your Carleton Network ID and password and press enter
  3. If you're unable to log in, check the network cable connected to the Mac mini and try again
  4. If you're still unable to log in, call the ITS Help desk at x5999

 

 

   If the computer does not appear on screen, check the following:

...

The remote conference participant will also want to hear you, so you will need to use the Revolabs wireless conferencing mics and speaker. If you don't start a phone call, the Revolab wireless mics work as if they were your computer microphone.  

  1. In the lower right cabinet on the side wall there is a pair of wireless microphones, a speaker, and a phone sitting in a charging base. Remove the microphones and the cylindrical speaker from their charging station. It looks like this:

     Image Modified

  2. The lights on the microphones and the top of the speaker should be green. If they are not, press the button on the front of each microphone until the light flashes green. This means that the microphones are receiving sound. To mute the microphones, press that button, and the light will turn red.  Place the two microphones on opposite ends of the table for maximum sound coverage.
  3. At the end of your call, please return the microphones and speaker to their charging station.

Quick Guide

 

Image Modified

System Guide for more information

http://revolabs.com/Documents/flx/FLX_asg.pdf

  

Using the large screen television with a laptop

...