...
On all Xerox devices, we are using the latest Xerox Global Print Driver PS (PS = PostScript), with its ability to dynamically detect the printer's features using Bi-Directional communication (via SNMP). Therefore, the first settings to check are that Bi-Di is on, the model was detected correctly, and the printer features were detected correctly. On the Configuration tab, except for the WorkCentre 7132 model, under the Bi-Directional Setup button, make sure Communication: is set to Automatic, the Refresh Rate is 2.0 minutes, and Job Notification is Off. If these are not correct, make these changes and use the Apply button, and then continue. On the Options tab, except for the WorkCentre 7132 model, under Device Options, Configuration: the model should have been detected correctly. If so, back on the Configuration tab, choose the Installable Options button to see what features were detected; these will be grayed out, because Bi-Di is on and so these features are detected automatically.
...